PDA

Επιστροφή στο Forum : BMW Κρυφό Μενού


E90-320A
31-03-06, 10:42
Η Ε90 μου το έχει και από ότι διάβασα υπάρχει και στην E46....

Copy & Paste απο το Ε90 Forum

1. Press and hold on to the "mileage counter reset button" for about 10-15 seconds and hold. But your car must be in the "on" position however, engine need not be running.
The center LCD would show:
01.00
FTSNGR
(The last 7 characters of your VIN number)

2. Now, release the button and then every time you press the button, it will reveal different sub sections in the 01 section as shown by 01.xx.

3. To see other menus, 03.xx-18.xx sucessfully, you need to unlock it using menu 19. To go to menu 19 from menu 1, press the 'mileage reset' button again and hold for about 2 seconds.

4. Now, the menu would show 01.__. It's time to, without delay, keep pressing the 'mileage reset' button until you see menu 19. Now stop at menu 19.

5. After you release the button and stop pressing the button at menu 19, it will show 19.__ momentarily. Wait for about 1 second until it shows:
19.00
LOCK ON
Code: 01
Now, without delay, press the button again and again until you reached the right code for your car. Pause after you reached the right code. Now, all the menus are unlocked. Your code can be 'calculated' from the last five digit of your VIN number for your convienence. If the last five digit of you VIN number is: 28393 for example, your code would be 2+8+3+9+3, which is 25. After you reached the right code of your car, pause until the display shows some changes.

6. To go to other menus after unlocking, press the button again for 2 seconds (until, 19.__ appears on screen again, iirc). Then stop at the menu which you want to access. For example, stop at 8.__ if you want to have a display of your instantaneous speed when you are driving. The 8.__ display will disappear quickly after you stop pressing the button. It will now appear as 8.00 which indicates that you have entered 'Menu 8'. To access sub menus, you press the button once to go from one sub menu to another. If you want to get out of "Menu 8", press and hold the button for 2 seconds and now, 8.__ will appear. Without delay, release the button and press the button until you reach the menu that you want to see.

Πληροφορίες πού δέιχνει....

01 Instrument cluster identification - Vehicle identification number, last 5 digits
02 System test
03 Not used
04 Electric load values
05 Range consumption
06 Fuel level
07 Current display values
08 Speed
09 System voltage
10 Not used
11 Units
12 Calculated time of arrival
13 Audible signals
14 Self-diagnostics
15 I/O ports processor
16 Dimming
17 Contrast
18 Not used
19 Locking
20 Fuel consumption correction 20.00
21 Reset

Πιο λεπτομεριακά....

01.00 FGSTNR = "Fahrgestellnummer" (Chassisnumber) = VIN
01.01 K-ZAHL W/T = specification to dash/instrument
01.02 BMWTNR BMW = part no. of dash/instrument
01.03 COD DIA = index for code and diagnosis
01.04 KI HSTL DATUM = "Herstellungs Datum" (dash/instrument manufactured/assembled on date...)
01.05 ???= Hardware hex no., probably version
01.06 SW = same for software
01.07 KODIERDATEN = data of instrument coding
01.08 CAN (no idea)
02.00 KI TEST = Dashbord test. All light, gauges, displays and so on will light up,
move.... works only when the engine is NOT running.
03.00 ??? (maybe it will show something after your first 'service', motoroil change) unused as yet
04.00 MOM VBR = actual fuel consumption
04.01 RW-VBR-MOM = fuel conspt per hour
04.02 = avrg fuel conspt since last reset
04.03 = distance used for calculation of avrg conspt
04.04 = avrg fuel conspt present trip
04.05 = seems pretty close to 04.03 but different start point, probably 03 = since last reset, 05 = present trip
05.00 = average fuel conspt used for calculation of mileage left
05.01 = present mileage left
06.00 how much you have in your 'tank' in liters. Left- and Right compartment and Total
06.01 dito in hex? no, overall fuel left in tanks as shown on dash
06.02 = seems to be electrical resistance of fuel level meters in Ohm
07.00 KTMP-MOM = Temp. Cooling Fluid (celcius)
07.01 ATMP-MOM = "Aussentemperatur" Temp. Outside (celcius)
07.02 dito in hex? could be
07.03 N-MOT-MOM = RPM
07.04 N-VWF-MOM = max. RPM at the moment. E60 it gives a value. E90 it shows "-----"
08.00 V-EFF = exact speed
08.01 V-ANZ = "Anzeige" speed shown on dash..
08.02 V-SZ photo says "invalid" (?)
08.03 D-GESCHW 1 WEG = avrg speed since last reset
08.04 D-GESCHW 1 ZEIT = time used for calculation of 08.04
08.05 D-GESCHW 2 WEG = avrg speed present trip
08.06 D-GESCHW 1 ZEIT = time used for calculation of 08.05
09.00 Voltage
10.00 KM/WOCHE = distance/week, dunno how that helps
11.00 has to do how the time will be displayed (= 12/24 hr display)
11.01 km or miles
11.02 Celcius or Fahrenheit
11.03 how to display fuel consumption. km/l or l/100km or mpg
12.00 V-ANKUNFT = speed at arrival time 12.01 ANK-ZEIT = time of arrival
13.00 AUDIO = test all warning sounds
14.00 FS EINTRAEGE = error messages (if any)
15.00 Oil temp?? in hex
16.00 Dashbord lighting.
17.00 Temp inside in the car??
18.00 CC-TEST = you can see some of the 'check control' messages.
19.00 UNLOCK
20.YY to 23.YY ??? 20 = correction factor for fuel conspt.
21 = reset dash. Keep fingers off.
22 and 23 not used.

e39_528
31-03-06, 11:31
Ολα τα BMW με κρυφο μενου π.χ Ε36 μετα το 9/95 Ε38 ολα Ε39 ολα Ε46 ολα Χ5,Χ3 Ε60,Ζ3,Ζ4 εχουν π.χ BC,Diagnostest,ημερ.παραγωγης.κ.τ.λ
http://bmw.bazzi.biz/geheim_menu.htm

ΦΑΝΗΣ
01-04-06, 00:50
Η Ε90 μου το έχει και από ότι διάβασα υπάρχει και στην E46....

Copy & Paste απο το Ε90 Forum

1. Press and hold on to the "mileage counter reset button" for about 10-15 seconds and hold. But your car must be in the "on" position however, engine need not be running.
The center LCD would show:
01.00
FTSNGR
(The last 7 characters of your VIN number)

2. Now, release the button and then every time you press the button, it will reveal different sub sections in the 01 section as shown by 01.xx.

3. To see other menus, 03.xx-18.xx sucessfully, you need to unlock it using menu 19. To go to menu 19 from menu 1, press the 'mileage reset' button again and hold for about 2 seconds.

4. Now, the menu would show 01.__. It's time to, without delay, keep pressing the 'mileage reset' button until you see menu 19. Now stop at menu 19.

5. After you release the button and stop pressing the button at menu 19, it will show 19.__ momentarily. Wait for about 1 second until it shows:
19.00
LOCK ON
Code: 01
Now, without delay, press the button again and again until you reached the right code for your car. Pause after you reached the right code. Now, all the menus are unlocked. Your code can be 'calculated' from the last five digit of your VIN number for your convienence. If the last five digit of you VIN number is: 28393 for example, your code would be 2+8+3+9+3, which is 25. After you reached the right code of your car, pause until the display shows some changes.

6. To go to other menus after unlocking, press the button again for 2 seconds (until, 19.__ appears on screen again, iirc). Then stop at the menu which you want to access. For example, stop at 8.__ if you want to have a display of your instantaneous speed when you are driving. The 8.__ display will disappear quickly after you stop pressing the button. It will now appear as 8.00 which indicates that you have entered 'Menu 8'. To access sub menus, you press the button once to go from one sub menu to another. If you want to get out of "Menu 8", press and hold the button for 2 seconds and now, 8.__ will appear. Without delay, release the button and press the button until you reach the menu that you want to see.

Πληροφορίες πού δέιχνει....

01 Instrument cluster identification - Vehicle identification number, last 5 digits
02 System test
03 Not used
04 Electric load values
05 Range consumption
06 Fuel level
07 Current display values
08 Speed
09 System voltage
10 Not used
11 Units
12 Calculated time of arrival
13 Audible signals
14 Self-diagnostics
15 I/O ports processor
16 Dimming
17 Contrast
18 Not used
19 Locking
20 Fuel consumption correction 20.00
21 Reset

Πιο λεπτομεριακά....

01.00 FGSTNR = "Fahrgestellnummer" (Chassisnumber) = VIN
01.01 K-ZAHL W/T = specification to dash/instrument
01.02 BMWTNR BMW = part no. of dash/instrument
01.03 COD DIA = index for code and diagnosis
01.04 KI HSTL DATUM = "Herstellungs Datum" (dash/instrument manufactured/assembled on date...)
01.05 ???= Hardware hex no., probably version
01.06 SW = same for software
01.07 KODIERDATEN = data of instrument coding
01.08 CAN (no idea)
02.00 KI TEST = Dashbord test. All light, gauges, displays and so on will light up,
move.... works only when the engine is NOT running.
03.00 ??? (maybe it will show something after your first 'service', motoroil change) unused as yet
04.00 MOM VBR = actual fuel consumption
04.01 RW-VBR-MOM = fuel conspt per hour
04.02 = avrg fuel conspt since last reset
04.03 = distance used for calculation of avrg conspt
04.04 = avrg fuel conspt present trip
04.05 = seems pretty close to 04.03 but different start point, probably 03 = since last reset, 05 = present trip
05.00 = average fuel conspt used for calculation of mileage left
05.01 = present mileage left
06.00 how much you have in your 'tank' in liters. Left- and Right compartment and Total
06.01 dito in hex? no, overall fuel left in tanks as shown on dash
06.02 = seems to be electrical resistance of fuel level meters in Ohm
07.00 KTMP-MOM = Temp. Cooling Fluid (celcius)
07.01 ATMP-MOM = "Aussentemperatur" Temp. Outside (celcius)
07.02 dito in hex? could be
07.03 N-MOT-MOM = RPM
07.04 N-VWF-MOM = max. RPM at the moment. E60 it gives a value. E90 it shows "-----"
08.00 V-EFF = exact speed
08.01 V-ANZ = "Anzeige" speed shown on dash..
08.02 V-SZ photo says "invalid" (?)
08.03 D-GESCHW 1 WEG = avrg speed since last reset
08.04 D-GESCHW 1 ZEIT = time used for calculation of 08.04
08.05 D-GESCHW 2 WEG = avrg speed present trip
08.06 D-GESCHW 1 ZEIT = time used for calculation of 08.05
09.00 Voltage
10.00 KM/WOCHE = distance/week, dunno how that helps
11.00 has to do how the time will be displayed (= 12/24 hr display)
11.01 km or miles
11.02 Celcius or Fahrenheit
11.03 how to display fuel consumption. km/l or l/100km or mpg
12.00 V-ANKUNFT = speed at arrival time 12.01 ANK-ZEIT = time of arrival
13.00 AUDIO = test all warning sounds
14.00 FS EINTRAEGE = error messages (if any)
15.00 Oil temp?? in hex
16.00 Dashbord lighting.
17.00 Temp inside in the car??
18.00 CC-TEST = you can see some of the 'check control' messages.
19.00 UNLOCK
20.YY to 23.YY ??? 20 = correction factor for fuel conspt.
21 = reset dash. Keep fingers off.
22 and 23 not used.
Παρακαλω καποιος εαν μπορει να μεταφρασει τα ανωθεν,διοτι Leatle English :nixweiss: :deal: ΄΄ή εστω να πει τα βασικα.Thank's:rtfm:

tasos x3
02-04-06, 09:06
Μηπως γνωριζει κανεις αν αυτο το {μενου} ειναι ιδιο και στο χ3 20i? Φοραω το ιδιο μοτερ με την 320 Ε90.

e39_528
02-04-06, 12:50
Μηπως γνωριζει κανεις αν αυτο το {μενου} ειναι ιδιο και στο χ3 20i? Φοραω το ιδιο μοτερ με την 320 Ε90.
Το μοτερ δεν εχει καμια σχεσει.

E90-320A
09-04-06, 12:53
Παρακαλω καποιος εαν μπορει να μεταφρασει τα ανωθεν,διοτι Leatle English :nixweiss: :deal: ΄΄ή εστω να πει τα βασικα.Thank's:rtfm:

Επειδεί είναι μεγάλο δες εδώ...

http://www.tranexp.com:2000/Translate/result.shtml ή εδώ
http://babelfish.altavista.com/

Νικ

Tasulis
09-04-06, 23:39
Καλα του έδωσες τα site για την μετάφραση. Εαν όμως την διαβάσει θα χαζέψει απο τα μαργαρητάρια που λεεί το εργαλείο τους.
Εχει πλάκα πάντως.

E90-320A
10-04-06, 20:49
Καλα του έδωσες τα site για την μετάφραση. Εαν όμως την διαβάσει θα χαζέψει απο τα μαργαρητάρια που λεεί το εργαλείο τους.
Εχει πλάκα πάντως.

Dummy H/Y είναι όχι A.I. H/Y. Πάντως κάτι θα καταλάβει.... Δοκίμασα να το μεταφράσω αλλά νευρίασα... Τελικά το παραδέχομαι δεν γνωρίζω καλά ελληνικά ούτε τα στοιχειώδη... Βαράτε...

Νικ...

john
14-04-08, 01:36
ερωτηση.το temp.cooling fluid μπορει να χρησιμοποιηθει σαν θερμοκρασια κινητηρα εν κινήση.αν οχι υπαρχει κατι αλλο που να δειχνει θερμοκ.κινητηρα εν κινήση?